Quality Cycle

We recognize that providing the best value involves a cycle of providing innovative ideas, such as unique packaging and custom mould programs; prompt sample delivery, competitive quotations, quality merchandise and timely delivery.
After all, the price on your purchase order is just the beginning of cost savings.

Test procedure from Indian Institute of packaging

  • DROP TEST : (Drop Height: 1.20 mtrs.)

    • First barrel was dropped diagonally on closure.
    • Second barrel was dropped flat on top.
    • Third barrel was dropped flat on narrow face.
    • Fourth barrel was dropped diagonally on bottom corner
    • Fifth barrel was dropped on bottom.

    OBSERVATION : Neither rupture nor leakage was observed from any of the tested barrels


  • CLOSURE LEAKAGE TEST :
    Filled barrels were kept upside down on the floor for one hour.

    OBSERVATION : No leakage was through the closures.


  • HYDRAULIC PRESSURE TEST :
    Hydraulic gauge pressure of 1.1 kg/cm2 was applied inside the barrel for a period of 5 minutes.

    OBSERVATION : Neither rupture nor leakage was observed from the barrel.


  • ENVIORNMENTAL STREE CRACK RESISTANCE TEST :
    The section of the barrel was placed in the test liquid at 80 ± 2º C for 48 hours.

    OBSERVATION : No cracking was observed.


  • STACK LOAD TEST :
    A superimposed weight was placed on a flat surface resting on the top of the barrel for a period of 28 days.
    The weight of equivalent to the total weight of filled identical barrels, which could be Stacked on it during transport.
    (Stacking height: 3.0 mtrs.) (Test was performed at the Institute)

    OBSERVATION : Neither deformation nor leakage was observed.